Interstar DIY Colors are pure iron oxide pigments designed to be used specifically in integral coloring of cementitious materials, whether it be Portland cement, various concrete products, mortar or stucco.
Interstar DIY Colors are available in 5 standard colors.
Packaging: DIY Colors are packaged in 1lb (454g) bags. Each bag is clearly marked with the color name. Each case contains 12 bags.
Storage: Store in a dry area, between 50°F and 90°F (10°C and 30°C). Protect from moisture, once the bag has been opened.
Directions: Blend color thoroughly with any dry mix cement-based product. Mix according to dry mix manufacturer’s instructions.
Note: For complete details, please refer to our Instruction Sheet on DIY Colors
Limitations: The optimal dosage of pigment suggested varies between 2% and 7%, based on the total weight of cementitious materials. A dosage of 10% of pigment based on the total weight of cementitious materials is the saturation point for pigment coloration. If the percentage of pigment is over 10% of the total weight of cementitious materials, there will be no benefits and it can affect the results considerably. In addition, if the percentage is lower than 1% of the total weight of cementitious materials, the coloration will be uneven and will affect the results.
Refer to material safety data sheet of the color desired.
Interstar products are readily available throughout Canada, United States and Mexico. Contact us to place an order or to find a distributor in your area.
Interstar’s technical staff and chemists are always available to offer their expert advice. Should you need technical assistance, please do not hesitate to contact us.
The limit of liability of this company shall be the purchase price paid by the user or buyer for the quantity of the Interstar product involved. See Interstar’s Warranty for complete details.
|Buy Online||Products||Services||Downloads||Contact||About Us|