Interseal

We are sorry. This product cannot be purchased online. In order to purchase this product, please contact our Customer Service Department.

Click here to access our contact page.

Product Information
Description
Interseal is an acrylic-based liquid compound made for the cure and protection of concrete. Interseal creates a protective membrane at the surface, that gives the concrete a glossy appearance. Interseal allows for an increased resistance to water, salt and stains. Interseal is available in three different formulas: Interseal 15G (low gloss), Interseal 20G (medium gloss) and Interseal 30G (high gloss).

Primary Application
  • Decorative concrete application
  • Floors
  • Plain concrete toppings
  • Precast
  • Color Hardener
  • Stamping
  • Concrete pavement
  • Slabs
  • Walks
Benefits
  • Easy to apply
  • Improves hydration of concrete for increased surface durability
  • Enhances color
  • Easy to clean
  • Increases surface protection
Technical Data
Packaging: Interseal is available in a 1-gallon (4-litre) can and a 5-gallon (20-litre) pail.

Storage: Store in a dry area between 50 o F and 90 o F (10 o C and 30 o C). Protect from freezing and from high temperatures.

Properties:
  • Appearance: Clear to light yellow liquid
  • Odor: Solvent
  • % active:
    • Interseal 15G 15%
    • Interseal 20G 20%
    • Interseal 30G 30%
Usage
Surface preparation: The surface to be treated must be clean and dry. Remove any dust or surface contamination. Also remove old sealers or composites that could be detrimental to the penetration of Interseal by using solvents such as toluene, xylene, mek or paint thinner.

Application:
Interseal does not require any dilution. The temperature of the concrete should be higher than 50 o ?F (10 o C ) before application. Apply uniformly with a paint brush, roller or spray gun. Do not circulate on treated surface until product is dry (4 to 6 hours).

Curing membrane: Apply Interseal when concrete surface is completely dry.

Protective membrane: Apply Interseal after a minimum drying time of 28 days.

Coverage:
  • Interseal 15G: 5 to 7.5 m2 / litre (200-300 ft2 / gallon)
  • Interseal 20G: 6 to 7.5 m2 / litre (240-300 ft2 / gallon)
  • Interseal 30G: 6 to 7.5 m2 / litre (240-300 ft2 / gallon)
Notes: An application that is too thick could cause a yellowing of the sealer. In cool and humid conditions, especially indoors (e.g., a garage), the coloration of freshly sealed concrete may not appear uniform and may show spots. As concrete cures, coloration will become even, but this can take up to several months. Interseal is not resistant to gasoline or to brake fluid.

Safety
Flammable liquid. Keep away from sparks and fire. Avoid all contact with skin or eyes. Wear safety gear when handling. Insure adequate ventilation of your work area. For more information, refer to material safety data sheet.

Availability
Interstar products are readily available throughout Canada, United States and Mexico. Contact us to place an order or to find a distributor in your area.

Technical Services
Interstar’s technical staff and chemists are always available to offer their expert advice. Should you need technical assistance, please do not hesitate to contact us.

Warranty
The limit of liability of this company shall be the purchase price paid by the user or buyer for the quantity of the Interstar product involved. See Interstar’s Warranty for complete details.